tda100 panasonic User Manual

tda100 panasonic User Manual

F.C.C. REQUIREMENTS AND RELEVANT


INFORMATION

1. Notification to the Telephone Company

This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On

the side of this equipment is a label that contains, among other information, a product identifier in the

format US: ACJMF03AKX-TDA100. If requested, this number must be provided to the telephone

company.

Installation must be performed by a qualified professional installer. If required, provide the telephone

company with the following technical information:

• Telephone numbers to which the system will be connected

• Make: Panasonic

• Model: KX-TDA100 and KX-TDA200

• Certification No.: found on the side of the unit

• Ringer Equivalence No.: 0.3A

• Facility Interface Code: 02LS2, 04DU9.BN/DN/1KN/1SN, METALLIC

• Service Order Code: 9.0F, 6.0P

• Required Network Interface Jack: RJ21X, RJ48C, RJ2HX

2. Ringer Equivalence Number (REN)

The REN is used to determine the number of devices that may be connected to a telephone line.

Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming

call. In most, but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the

number of devices that may be connected to a line, as determined by the total RENs, contact the local

telephone company. The REN for this product is part of the product identifier that has the format US:

ACJMF03AKX-TDA100. The digits represented by 03 are the REN without a decimal point (e.g., 03 is

a REN of 0.3). For earlier products, the REN is separately shown on the label.

3. Incidence of Harm to the Telephone Lines

If this equipment causes harm to the telephone network, the telephone company will notify you in

advance that temporary discontinuance of service may be required. But if advance notice isn't practical,

the telephone company will notify the customer as soon as possible. Also, you will be advised of your

right to file a complaint with the FCC if you believe it is necessary.

4. Changes in Telephone Company Communications Facilities, Equipment, Operations and

Procedures

The telephone company may make changes in its facilities, equipment, operations or procedures that

could affect the operation of the equipment. If this happens the telephone company will provide

advance notice in order for you to make necessary modifications to maintain uninterrupted service.

5. Trouble with this equipment

If trouble is experienced with this equipment, for repair or warranty information, please see the attached

warranty, which includes the Servicenter Directory. If the equipment is causing harm to the telephone

network, the telephone company may request that you disconnect the equipment until the problem is

resolved.

6. Connection to Party Line

Connection to party line service is subject to state tariffs. Contact the state public utility commission,

public service commission or corporation commission for information.
 
 
downloadKX-TDA100 panasonic User Manual

Read More

No comments

tda4605 datasheet

tda4605

CONTROL CIRCUIT FOR SWITCH MODE POWER SUPPLIES USING MOS  TRANSISTORS

DESCRIPTION


The IC TDA4605controls the MOS PowerTransistor and performs all necessary regulation and

monitoring functions in free running flyback converters.

Since good load regulation over a wide load range is attained, this IC is particularly suitable

for Consumer as well asIndustrial PowerSupplies.

Alternative source of theTDA4605 is alsoavail-

ablefrom SIEMENSS emiconductors Consumer ElectronicsA.G.

download tda4605 datasheet pdf

Read More

No comments

uln2003 datasheet

uln2003 datasheet

HIGH VOLTAGE AND HIGH CURRENT


DARLINGTON TRANSISTOR ARRAY

DESCRIPTION

The ULN2003 is a monolithic high voltage and high current

Darlington transistor arrays. It consists of seven NPN darlington

pairs that features high-voltage outputs with common-cathode

clamp diode for switching inductive loads. The collector-current

rating of a single darlington pair is 500mA. The darlington pairs

may be parrlleled for higher current capability. Applications include

relay drivers,hammer drivers, lampdrivers,display drivers(LED gas

discharge),line drivers, and logic buffers.

The ULN2003 has a 2.7kΩ series base resistor for each

darlington pair for operation directly with TTL or 5V CMOS

devices.

FEATURES

* 500mA rated collector current(Single output)

* High-voltage outputs: 50V

* Inputs compatibale with various types of logic.

* Relay driver application
 
download uln2003 datasheet

Read More

No comments

tda2822m datasheet

tda2822m datasheet

DUAL LOW-VOLTAGE POWER AMPLIFIER

SUPPLYVOLTAGEDOWNTO1.8V



.LOWCROSSOVERDISTORSION


.LOWQUIESCENTCURRENT


BRIDGEORSTEREOCONFIGURATION
 
 

DESCRIPTION


TheTDA2822M is amonolithic integrated circuit in

8 lead Minidip package. It is intended for use as

dual audio power amplifier in portable cassette

players and radios.
 
download  tda2822m datasheet

Read More

No comments

tda9341ps n3 a

TDA9341PS/N3/A Selling Leads, TDA9341PS/N3/A Datasheet PDF

tda9341ps n3 a

Read More

No comments